Telephone blocking
103
Step by Step
Telephone blocking
Handset telephone lock
You can protect your handset against unauthorised ac-
cess by entering a 4-digit numerical code to lock it.
The PIN is preset to "0000" (default). The handset does
not prompt for a PIN in this setting. As soon as you have
changed the PIN you will need to enter it when you turn
on the handset.
Enter the value "0000" again to deactivate the PIN.
Entering a new PIN
© Open the main menu of the handset.
st [Select the menu item and confirm.
st
[Select the menu item and confirm.
st
[Select the menu item and confirm.
o Enter the old PIN. If a PIN has not yet been set, then en-
ter "0000".
o Enter the new PIN.
s Move the cursor down one line.
o Repeat the new PIN.
[ Confirm your entries. The new PIN is saved.
Press and hold down the On-hook key to return to idle
status.
Attention:
If you have forgotten your PIN, please contact
Siemens Service. It will be reset at your own ex-
pense.
H/Set Settings
Ð
Handset
Change HSPIN
To Next Page
Loading...
