Siemens Gigaset SL37H - Activating;Deactivating Auto Answer; Adjusting Handsfree and Earpiece Volume

20
First steps
Gigaset SL37H / IM5 RU English / A31008-M1952-S301-2-9U19 / main.fm / 4.11.08
Version 4, 16.09.2005
w ¢ Ð ¢ Display ¢ Screen Saver
The current setting is displayed.
¤ Change multiple line input:
Activation:
Select On (screensaver is displayed) or
Off (no screensaver).
Selection:
If required, change the screensaver
(see below).
¤ Save changes: (page 31).
If the screensaver conceals the display,
briefly press a or w to show the idle
display with time and date.
Changing the screensaver
w ¢ Ð ¢ Display ¢ Screen Saver
s Scroll to the Selection line.
§View§ Press the display key.
The active screensaver is
displayed.
s Select screensaver and press
§Change§.
¤ Save changes: (page 31).
Setting the display backlight
Regardless of whether or not the handset
is in the charging cradle, you can activate
or deactivate the backlighting. If the hand-
set is switched on, the display is perma-
nently dimmed.
w
¢ Ð ¢ Display ¢ Backlight
The current setting is displayed.
¤ Change multiple line input:
In Charger
Select On or Off.
Without Charger
Select On or Off.
§Save§ Press the display key.
a Press and hold (idle status).
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
w
¢ Ð ¢ Handset
Auto Answer
Select and press
§OK§ (=on).
a Press and hold (idle status).
Changing the handsfree/
earpiece volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels.
In idle status:
t
¢ Handset Volume
r Set the earpiece volume.
s Scroll to the Speaker: line.
r Set the handsfree volume.
§Save§ Press display key if necessary
to save the setting.
Setting the volume during a call:
t Press the control key.
r Set the volume.
The setting will automatically be saved
after approx. 3 seconds or press the dis-
play key
§Save§.
If t is assigned with another function,
e.g. when toggling:
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Please note:
With the On setting, the standby time of the
handset can be significantly reduced.
Please note:
You can also set the call volume, the ringer
tones, the advisory tones and the silent alert
via the menu.
‰