30
First steps
Gigaset SL37H / IM5 RU English / A31008-M1952-S301-2-9U19 / main.fm / 4.11.08
Version 4, 16.09.2005
Bluetooth
ò
Qualified Design Identity
The Bluetooth QD ID for your
Gigaset SL37H is: B011264.
Specifications
Recommended battery pack
(Valid at the time of going to press)
Technology: Lithium ion (Li-Ion):
Voltage: 3.7 V
Capacity: 700 mAh
Type: V30145-K1310-X250
V30145-K1310-X322
V30145-K1310-X401
The handset is supplied with the recom-
mended battery pack. Only the original
battery pack may be used.
Handset operating times/charging
times
The operating time of your Gigaset
depends on the capacity and the age of
the batteries and the way they are used.
(All times are maximum possible times
and apply when the display backlight is
switched off.)
Notes on the user guide
This section explains the meaning of cer-
tain typographical conventions that are
used in this user guide.
Example of a menu input
The steps you need to perform are shown
in abbreviated form in the user guide. This
is illustrated below using the example of
"Setting the contrast for the display". The
things you have to do are explained in the
boxes.
Standby time approx. 350 hours (15 days)
Talktime approx. 14 hours
Charging time approx. 3.5 hours
w ¢ Ð ¢ Display
¤ When the handset is in idle status,
press the control key in the centre
(w) to open the main menu.
¤ Use the q control key to select the
Ð Settings icon.
¤ Press w or press the display key §OK§
to confirm the Settings function.
The Settings submenu is displayed.
¤ Press on the bottom of control key q
until the Display menu function is
selected.
¤ Press w or press the display key §OK§
to confirm the selection.
Contrast Select and press
§OK§.
¤ Press on the bottom of control key q
until the Contrast menu function is
selected.
¤ Press w or press the display key §OK§
to confirm the selection.
r Select contrast and press w
or press the display key
§Save§.
¤ Press on the right or left of the control
key to set the contrast.
¤ Press w or press the display key §Save§
to confirm the selection.
a Press and hold (idle status).
¤ Press and hold the end call key until the
handset returns to idle status.