Siemens Gigaset SL55 - Page 47

46
SMS (text messages)
E45-S45-SL55 ISDN-Basen / en / A31008-M368-B103-1-7619 / sms.fm / 23.03.2006
Copying a phone number from a text message to the directory
Your telephone can "identify" phone numbers in a received text message. It indicates
this by highlighting the sequence of digits (max. 32). If the text message contains mul-
tiple strings of digits, the first string of digits is highlighted. Scrolling through the text
message with s will automatically highlight the next string of digits etc.
Requirement: You have opened a text message in the incoming message list to read
(page 44).
Adding a text message sender's telephone number to the directory
Requirement: You have opened the incoming message list and selected a message
(page 43).
i
On a PABX: The access code (outside line code) is automatically placed
before the phone number (page 79).
Hello Sabine, here is my
new number
1234567890
Ó Options
The string of digits is
highlighted in black.
Ó
Press the display key to create a new entry.
v
/ v <New Entry>
Select and confirm.
SL55 only:
Then select the icon for Tel. ¾, Phone (Office) = or
Phone (Mobile) > and confirm with
.
s / s ~
Scroll to the line Name and enter the name
(for text entry see page 103).
§Save§
Confirm. The entry is stored.
OK
OK
i
The phone number must be stored in the directory together with its area
code (access code) so that it can also be used for sending text messages.
v / v
Open the menu.
s
/ s Copy to dir.
Select and confirm.
v
/ v <New Entry>
Select and confirm.
SL55 only:
Then select the icon for Tel. ¾, Phone (Office) = or
Phone (Mobile) > and confirm with
.
s / s ~
Scroll to the line Name and enter the name
(for text entry see page 103).
§Save§
Confirm. The entry is stored.
OK
OK
OK