58
Setting up the answering machine
E45-S45-SL55 ISDN-Basen / en / A31008-M368-B103-1-7619 / answeringm_config.fm / 23.03.2006
Activating/deactivating automatic listen in
You can set up your answering machine so that it automatically switches a handset
assigned to it or the base station (CX263 or SX353 only) to automatically listen in when
it is recording a message.
By default, automatic listen in is deactivated.
Assigning a terminal
Only one terminal (handset or base station) can be assigned to an answering machine
for listen in. You can choose a terminal to which one of the answering machine's receive
MSNs is assigned. Only terminals that support handsfree mode are displayed. Automatic
pickup (page 59) must be activated.
Requirement: You have selected an answering machine (page 85).
Activating/deactivating listen in
You can only activate the listen in function if a terminal has been assigned to the
answering machine.
Requirement: You have selected an answering machine (page 85).
s
/ s Settings
Select and confirm.
s
/s Aut. listen in
Select and confirm.
s
/ s Select HS
Select and confirm.
s
/ s INT13:
Select terminal and confirm, e. g. INT13: Anna.
OK
OK
OK
OK
s / s Settings
Select and confirm.
s/s Aut. listen in
Select and confirm.
either ...
To activate listen in:
Activate?
Confirm.
or ...
To deactivate listen in:
Deactivate?
Confirm.
OK
OK
OK
OK
To Next Page
Loading...
