11
Product overview
Gigaset SX682 WiMAX / engbt / A31008-N921-R101-2x-7619 / Product_intro.fm / 27.3.08
Schablone 2007_10_19
u For information about the optional Siemens outdoor antenna, please refer to "Con-
necting the Siemens outdoor antenna" on page 16.
u For information on connecting the mains adapter, please refer to "Switching on the
devices" on page 18.
u For information on the reset button, please refer to "Restarting and resetting the
Gigaset SX682 WiMAX" on page 19.
u For information on the Ethernet port, please refer to "Connecting the PC" on
page 16.
LEDs
The LEDs indicate the status of the Gigaset SX682 WiMAX and the current signal
strength.
Name LED Meaning
Power: power
supply
Lights up green The Gigaset SX682 WiMAX is powered cor-
rectly.
Does not light up The Gigaset SX682 WiMAX is not powered
correctly or the power supply has failed.
Online: active
connection
Lights up green The Gigaset SX682 WiMAX is registered with
a WiMAX network and ready for use.
Does not light up The Gigaset SX682 WiMAX is not registered
with a WiMAX network; it is not possible to
establish an Internet connection.
Flashes green The Gigaset SX682 WiMAX is establishing a
connection with a WiMAX network.
Lights up red The Gigaset SX682 WiMAX is not ready. Pos-
sible cause: device is overheating or faulty.
RSSI: signal strength
LAN: Ethernet port
Online: active connection
Power: power supply
Phone: telephone (VoIP)
To Next Page
Loading...
