12
Product overview
Gigaset SX682 WiMAX / engbt / A31008-N921-R101-2x-7619 / Product_intro.fm / 27.3.08
Schablone 2007_10_19
LAN: Ethernet
port
Lights up green Correct cable connection with a powered
connection partner.
Does not light up No or incorrect cable connection.
Flashes green Data transfer via the Ethernet port.
Phone: telephone Lights up green The phone connection is active and regis-
tered with a VoIP provider. You can make calls
via the Internet.
Does not light up The telephone connection is not active or not
registered with a VoIP provider. You cannot
make calls via the Internet.
Flashes green The connected telephone is active: it is being
used to make a call or there is an incoming
call.
RSSI: signal
strength
0 to 4 LEDs light
up green
The LEDs on the Gigaset SX682 WiMAX help
you to position the antenna more easily. The
LEDs indicate the signal strength; the more
LEDs that light up, the better the signal
reception.
All 4 LEDs flash
green
The Gigaset SX682 WiMAX is being reset to
the factory settings; see "Returning the
Gigaset SX682 WiMAX to factory settings" on
page 19.
Name LED Meaning
To Next Page
Loading...
