41
Settings
Example: setting the tone ringing volume
NEXT
Scroll to Tone ringing and confirm.
Tone ringing
OK
Tonering. volume
Confirm tone ringing volume ā you hear tone at the
OK
current setting (default: level 6), see display.
Symbol for tone ringing
Dark bars indicate the current setting
ā level 3 in this case
Save current setting (save)
Change the setting
NEXT
Use the display key to set the required volume.
SAVE
Save the setting.
Note:
l You can cancel each new setting before saving it by pressing {.
You will then jump back to the higher-level display.
l The language setting only refers to the display texts stored in the
mobile unit. The system text language, e.g. when a call is in progress,
corresponds to the Hicom 300E system setting.
Tonering, volume
NEXT SAVE
To Next Page
Loading...
