Need help?Do you have a question about the Siemens HiPath HG 1500 and is the answer not in the manual?
General| Category | Gateway |
|---|---|
| Brand | Siemens |
| Model | HiPath HG 1500 |
| Mounting | 19-inch rack mountable |
| Weight | 3.5 kg |
| Type | Gateway |
| Network Protocols | H.323, SIP |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0 to 40 °C |
| Humidity | 10 to 90% non-condensing |
| Analog Ports | 8 FXS ports |
Connects Hicom systems to the LAN via an integrated HXGS/HXGM board.
Details on Ethernet address, card recognition, administration, and password system.
Details on HXGS and HXGM board variants, hardware, interfaces, and V.24 connections.
Covers installation requirements, slotting, and step-by-step installation process.
Guides for initial setup via modem, ARP, and serial interface.
Steps to configure the system for gatekeeper mode and the NGK 100 gatekeeper.
Procedure for development trace, error handling, and determining firmware version.
How to integrate HiPath HG 1500 in star and bus network topologies.
Process for performing SW upgrades and firmware downloads.
To Next Page