vms.fm
A31003-S2330-B690-2-7619, January 2003
HiPath Xpressions V3.0, User Manual
3-55
For internal use only
Mailbox Processing on the Telephone and the Voice Mail Service
Operating your Mailbox using VMS
Connection with a recipient of your choice
The following options are available for setting up a connection to a recipient of your choice:
Print the fax or e-mail message
The following options are available if you want to print the fax or e-mail message
02Set up connection to recipient of your choice:
Push 0 and then push 2.
* Select a recipient:
Enter the recipient’s call number and push the star key to conclude the
entry.
# If the entry was incorrect: Delete the recipient call number entry:
Push the pound key. You can resume the process of entering a recipient
call number immediately afterwards.
or
0*Cancel the entire process and return to the main menu:
Push 0 and then push the star key.
1 Output on default fax device (provided this has been defined):
Push 1.
2 Output on default printer (provided this has been defined):
Push 2.
3 Enter the number of a fax device:
Push 3.
* Select the fax device:
Enter the fax number and push the star key to conclude the
entry.
# If the entry was incorrect: delete the fax number entered :
Push the pound key. You can resume the process of entering
a fax number immediately afterwards.
You can repeat this step if required.
* Cancel this function
Push the star key.
0*Cancel the entire process and return to the main menu:
Push 0 and then push the star key.
To Next Page
Loading...
