Need help?Do you have a question about the Siemens RUGGEDCOM RMC30 and is the answer not in the manual?
General| Category | Server |
|---|---|
| Ethernet Ports | 6 x 10/100/1000 Mbps |
| Operating Temperature | -40°C to +70°C |
| Ingress Protection | IP30 |
| Mounting | DIN rail |
Explains different types of alerts (DANGER, WARNING, CAUTION, IMPORTANT, NOTE) used in the document.
Lists other documents relevant to the RUGGEDCOM RMC30.
Provides information on how to obtain user documentation online or from customer support.
Details Siemens' educational services for networking and communication technologies.
Information on how to contact Siemens Customer Support for technical assistance and general inquiries.
Lists key features and capabilities of the RUGGEDCOM RMC30, including connectivity and serial encapsulation.
Describes the RUGGEDCOM RMC30's ports, controls, and indicator LEDs.
Explains the device's design for mounting flexibility, including DIN rail or panel installation.
Details how to connect AC or DC power supplies to the RUGGEDCOM RMC30.
Describes methods for accessing the RUGGEDCOM ROS console and Web interfaces.
Instructions on how to reset (reboot) the RUGGEDCOM RMC30 using the dedicated button.
Details the 10/100Base-TX Ethernet port specifications, including LEDs and pin-out.
Describes the RS232/RS485/RS422 serial terminal connector, pin configuration, and usage.
Lists input voltage ranges, fuse ratings, and maximum power consumption for the device.
Details specifications for the copper Ethernet ports, including speed, connector, duplex, and cable type.
Lists the networking standards supported by the RUGGEDCOM RMC30.
Specifies the ambient operating temperature, humidity, and storage conditions for the device.
Provides physical dimensions, weight, ingress protection, and enclosure material details.
Details the various approvals and certifications obtained for the RUGGEDCOM RMC30.
Presents the results of Electromagnetic Compatibility (EMC) and environmental tests performed on the device.
To Next Page
