Siemens RUGGEDCOM RMC30 User Manual

RUGGEDCOM RMC30
Installation Guide
Chapter 4
Technical Specifications
Power Supply Specifications 19
Technical Specifications
This section provides important technical specifications related to the device and available modules.
CONTENTS
• Section4.1, “Power Supply Specifications”
• Section4.2, “Copper Ethernet Port Specifications”
• Section4.3, “Supported Networking Standards”
• Section4.4, “Operating Environment”
• Section4.5, “Mechanical Specifications”
Section4.1
Power Supply Specifications
Power Supply Type Minimum Input Maximum Input Internal Fuse Rating
a
Max. Power
Consumption
24 VDC 18 VDC 36 VDC
48 VDC 36 VDC 59 VDC
88 VDC 300 VDC
HI
b
85 VAC 264 VAC
3.15A (T) 3 W
a
(T) denotes time-delay fuse.
b
This is the same power supply for both AC and DC.
Section4.2
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
RMC30.
Speed
c
Connector Duplex
c
Cable Type
d
Wiring
Standard
e
Maximum
Distance
f
Isolation
g
10Base-TX RJ45 FDX/HDX > CAT-5 TIA/EIA T568A/B 100 m (328 ft) 1.5 kV
c
Auto-negotiating.
d
Shielded or unshielded.
e
Auto-crossover and auto-polarity.

Siemens RUGGEDCOM RMC30 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RMC30
Category	Server
Language	English