Siemens MK8000

Building Technologies
Fire Safety & Security Products
MK8000 MP4.10
OPC Server for subsystems
Installation
Function & Configuration
Commissioning
Safety Regulations

Siemens MK8000 Specifications

General

Brand	Siemens
Model	MK8000
Category	Server
Language	English

Summary

Definitions of Terms

Installation

Installation requirements

Lists essential hardware and software prerequisites for the MK8000 OPC Server.

MK8000 OPC Server System Requirements

Specifies the detailed system requirements for hardware, operating systems, and application software.

Installation types

Describes different deployment options for the MK8000 software setup.

Selecting the MK8000 configuration

Guides the choice of installation setup for MK8000 based on system needs.

Installation checklist

Installing MK8000 Software

MK8000 OPC server

Describes the MK8000 OPC server and its core functionalities.

Installing the MK8000 on the main (Stand-Alone) station

Step-by-step guide for installing MK8000 on a primary Stand-Alone station.

Installing the MK8000 on the FEP (Distributed Systems)

Testing the network communication (Distributed Systems)

Configuring the MK8000

Configuration Checklist

MK8000 architecture in the Composer project

Explains how to represent the MK8000 system architecture within the Composer project.

MK8000 Communication drivers

Details the selection and addition of communication drivers for connecting subsystems.

Connecting networks to the MK8000

Describes how to link control units and network components to MK8000 drivers.

What to drag to the drivers

Adjusting network settings

Downloading configuration to the MK8000

Covers the process of transferring the project configuration to the MK8000 server.

Verifying the MK8000 license

Details how to check the MK8000 license status and configured data points.

Testing the Configuration

Checking Stations

Checking Internal Configuration

Connecting to the MK8000 OPC Server

Connecting the network subsystem, and verifying correct communication

Confirms correct communication between MK8000 and connected network subsystems.

Tips for Integrating with an OPC client

Exporting data to a 3 rd party OPC Client

Integrating into a network (Distributed configuration)

Modifying DCOM settings

Integrating clients that dont support DCOM