EasyManuals Logo

Siemens HM776G1 1B Series User Manual

Siemens HM776G1 1B Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Disposal en
31
Fault Cause and troubleshooting
The time is not dis-
played when the ap-
pliance is switched
off.
Basic setting has been changed.
Change the basic setting for the time display.
→"Basic settings", Page20
Appliance door can-
not be opened.
The cleaning function locks the appliance door; lights up in the display.
Allow the appliance to cool down until goes out in the display.
→"Cleaning function Pyrolytic activeClean", Page25
The childproof lock locks the appliance door.
Use the button to deactivate the childproof lock.
→"Childproof lock", Page20
You can switch off the lock in the basic settings.
→"Basic settings", Page20
HomeConnect is not
working correctly.
Different causes are possible.
Go to www.home-connect.com.
During simple mi-
crowave operation,
the cooking compart-
ment becomes hot.
The drying function is switched on.
The interior lighting
does not work.
The LED light is defective.
Call the after-sales service.
→"Customer Service", Page32
Maximum operating
time reached.
To prevent an unwanted permanent operation, the appliance automatically stops heating
after several hours if the settings are unchanged. A message appears in the display.
The point at which the maximum operating time is reached is determined by the corres-
ponding settings for an operating mode.
1.
To continue operation, switch the appliance off and on again using . Reset and start
the operation.
2.
If you do not need to use the appliance, press to switch it off.
Tip:To prevent the appliance from switching off when you do not want it to, set a cooking
time.
→"Time-setting options", Page15
Error code made up
of letters and num-
bers appears on the
display, e.g. E0111.
The electronics have detected a fault.
1.
Switch the appliance off and on again.
a If the fault was a one-off, the message disappears.
2.
If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→"Customer Service", Page32
The cooking result is
not satisfactory.
Settings were unsuitable.
Adjustment values, e.g. temperature or cooking time, depend on the recipe, quantity and
food.
Next time, set lower or higher values.
Tip:A lot of other information about the food preparation and corresponding adjustment
values can be found in the HomeConnect app or on our website www.siemens-
home.bsh-group.com .
25  Disposal
Find out here how to dispose of old appliances cor-
rectly.
25.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
1.
Unplug the appliance from the mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens HM776G1 1B Series and is the answer not in the manual?

Siemens HM776G1 1B Series Specifications

General IconGeneral
BrandSiemens
ModelHM776G1 1B Series
CategoryOven
LanguageEnglish

Related product manuals