EasyManuals Logo

Siemens HM776G1 1B Series User Manual

Siemens HM776G1 1B Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
en Troubleshooting
30
3.
Hook the rear retainers with the hook into the top
hole and push them into the bottom hole ⁠.
23.3 Attaching the rails
1.
Hook the rear shelf support into the retainers at the
top and bottom and pull it forwards ⁠.
2.
Hook in the rail at the front and press it down .
24  Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
by trained specialist staff.
Only use genuine spare parts when repairing the
appliance.
If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
24.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
"Sprache Deutsch"
appears in the dis-
play.
There has been a power cut.
Configure the initial configuration settings.
→"Performing initial start-up", Page13
The operation does
not start or is inter-
rupted.
Different causes are possible.
Check the notifications that appear on the display.
→"Displaying information", Page14
Malfunction
Call the after-sales service.
→"Customer Service", Page32
Appliance does not
heat up.
Demo mode is switched on.
1.
Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and then on again.
2.
Switch off demo mode in the basic settings within approx.5minutes.
→"Changing the basic settings", Page21
There has been a power cut.
Open and close the appliance door once after a power failure.
a The appliance is checked and is ready to use.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens HM776G1 1B Series and is the answer not in the manual?

Siemens HM776G1 1B Series Specifications

General IconGeneral
BrandSiemens
ModelHM776G1 1B Series
CategoryOven
LanguageEnglish

Related product manuals