Siemens IQ300 SX93HX60CG User Manual

Cleaning and servicing en
39
Cleaning filters
Soiling in the dishwashing water may
block the filters.
1. After each wash check the filters
for residue.
2. Turn the coarse filter anticlockwise
and remove the filter system ⁠.
‒ Check that no foreign objects
fall into the sump.
1
2
3. Pull down the micro filter to re-
move.
4. Press the locking catches to-
gether and lift the coarse filter out
⁠.
1
2
5. Clean the filter elements under run-
ning water.
Carefully clean the rim of dirt
between the coarse and the fine fil-
ter.
6. Re-assemble the filter system.
Make sure that the locking catches
on the coarse filter click into posi-
tion.
7. Insert the filter system into the ap-
pliance and turn the coarse filter
clockwise.
Make sure that the arrow markings
match up.

Siemens IQ300 SX93HX60CG Specifications

General

Type	Freestanding
Noise Level	44 dB
Capacity	13 place settings
Water Consumption per Cycle	9.5 liters
Dimensions (HxWxD)	84.5 x 60 x 60 cm
Number of Programs	6
Half Load	Yes
Child Lock	Yes
Special Features	VarioSpeed Plus
Delay Start	Yes (up to 24 hours)