Siemens iQ300 SN93HX60CG/20 User Manual

9001643919 (020417) SN93HX60CG *9001643919*
Quick reference guide Dishwasher
en
Before using for the first time, read the instruction manual and the safety information it contains.
Setting up Home Connect
Tip:Connect your appliance to a mobile device. You can con-
veniently change all settings using the HomeConnect app.
1.
Install the HomeConnect app on your mo-
bile device and follow the instructions.
2.
Scan the QR code with the HomeConnect
app.
Overview of water hardness settings
You can find an overview of the
water hardness values that can
be selected here.
A table of country-specific units
can be found in the instruction
manual.
Hardness
range
mmol/l Setting
value
Soft 0 - 1.1 H00
Soft 1.2 - 1.4 H01
Medium 1.5 - 1.8 H02
Medium 1.9 - 2.1 H03
Medium 2.2 - 2.9 H04
Hard 3.0 - 3.7 H05
Hard 3.8 - 5.4 H06
Hard 5.5 - 8.9 H07
Setting the water softening sys-
tem
1.
Press ⁠.
2.
To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows ⁠.
3.
Press repeatedly until the right
water hardness has been set.
4.
To save the settings, press
for 3 seconds.
Adding special salt
To avoid damage to the appliance, only add special
salt to the dispenser for special salt just before the
programme starts.
1.
Unscrew the lid of the dispenser for special salt
and remove.
2.
On initial start-up: Fill the dispenser right up with
water.
3.
Add the special salt to the
dispenser. The water in the
dispenser is displaced and
forced out. Never add de-
tergent.
4.
Place the lid back on the dispenser and turn to
close.
Adding rinse aid
1.
Press the catch on the lid
of the dispenser for rinse
aid and lift ⁠.
1
2
2.
Add rinse aid up to the
max mark.
max
3.
Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
How to use your appliance
1.
Load the tableware.
Only clean tableware that is suitable for dish-
washers. Remove large remnants of food from
the tableware. Check that the spray arms can ro-
tate freely.
2.
Add detergent.
3.
Switch on the appliance ⁠.
4.
Select the programme.
5.
Start the programme ⁠.
6.
Remove the tableware at the end of the pro-
gramme.
7.
To cancel the programme, press for
approx. 4seconds.
The programme is cancelled and ends after ap-
prox. 1minute.
Programmes
The programme data has been meas-
ured in the laboratory according to
European standard EN60436.
The consumption figures depend on
the programme and additional func-
tion selected.
The runtime will change if the rinse
aid system is switched off or rinse aid
needs to be added.
Programme 1) Duration [h:min]
2) Energy [kWh]
3) Water [l]
Intensive 70°
1) 2:05 -2:15
2) 1,300 -1,400
3) 11,5 -14,0
Auto 45-65°
1) 1:40-2:45
2) 0,900-1,500
3) 7,0-15,5
Eco 50°
1) 4:55
2) 0,849
3) 9,5
Speed 65°
1) 1:00
2) 1,300
3) 10,5
Speed 45°
1) 0:29
1
2) 0,800
3) 10,5
Machine Care
1) 2:10
2) 1,350
3) 15,2
Favourite
1) 0:15-0:15
2) 0,050-0,050
3) 4,0-4,0
1
half standard load
Adding detergent
1.
Add the detergent to the
dry detergent dispenser.
15 ml
25 ml
50 ml
2.
Close the lid of the deter-
gent dispenser.
a The lid clicks into position.

Siemens iQ300 SN93HX60CG/20 Specifications

General

Type	Freestanding
Capacity	13 place settings
Energy Efficiency Class	C
Noise Level	44 dB
Water Consumption per Cycle	9.5 liters
Dimensions (HxWxD)	84.5 x 60 x 60 cm
Number of Programs	6
Control Type	Electronic
Display Type	LED
Half Load	Yes
Child Lock	Yes
Special Features	VarioSpeed Plus, AquaSensor
Delay Start	Yes

Summary

Setting Up Home Connect and Water Softening System

Connect to Home Connect App

Connect your appliance to a mobile device using the Home Connect app for convenient settings management.

Configure Water Softening System

Adjust water hardness settings via the appliance's basic settings menu for optimal performance.

Dishwasher Programmes

Adding Dishwasher Consumables

Adding Special Salt

Add special salt to its dispenser just before starting a programme to prevent appliance damage.

Adding Rinse Aid

Fill the rinse aid dispenser up to the max mark for optimal drying and shine.

Adding Detergent

Add detergent to the dry detergent dispenser before closing the lid.

Operating the Dishwasher

Basic Operation

Load tableware, add detergent, switch on, select programme, and start.

Cancelling a Programme

Press and hold the Reset button for 4 seconds to cancel the current programme.

Cleaning and Maintenance

Cleaning Filters

Regularly clean the coarse and micro filters under running water to ensure optimal performance.

Cleaning Spray Arms

Check and clean spray arm nozzles for blockages to ensure effective water distribution.

Cleaning Wastewater Pump

Remove and clean the wastewater pump, ensuring no food remnants obstruct the impeller.

Troubleshooting Common Faults

Water Supply Issues (E:32-00)

Check for kinked supply hoses, closed taps, or blocked filters causing water supply faults.

Filter or Pump Blockage (E:92-40, E:61-02)

Clean filters and wastewater pump if error codes related to blockages appear.

Tableware Cleaning Problems

Address issues like food residue, blocked spray arms, or weak programmes for better results.

Detergent or Rinse Aid Issues

Manage streaks by adjusting rinse aid, or ensure detergent is dispensed correctly.

Electronic Faults

Reset the appliance by pressing the main switch button if all LEDs light up or flash.