Siemens iQ500 GS36NAXEP - Available Accessories; Basic Appliance Operation; Switching the Appliance On

en operation
14
1. Remove the ice cube tray , fill ¾
full with drinking water and re-in-
sert ⁠.
Note:If it is filled with too much
drinking water, this may impair the
function of the ice cube maker.
The ice cubes cannot be removed
individually from the ice cube tray.
Too much drinking water was ad-
ded and isrunning into the ice
cube container, causing any ice
cubes tofreeze together.
2. When the ice cubes are frozen, ro-
tate the knob on the ice cube tray
several times in a clockwise direc-
tion and release it.
a The ice cubes will loosen and fall
into the ice cube container.
3. Pull out the ice storage container
and remove the ice cubes.
6.2 Accessories
Use original accessories. These have
been made especially for your appli-
ance.
The accessories for your appliance
depend on the model.
Ice pack
Use the ice pack for temporarily
keeping food cool, e.g. in a cool bag.
Tip:If a power failure or malfunction
occurs, the ice pack can be used to
slow down the thawing process for
the stored frozen food.
operation
7 Basic operation
operation
7.1 Switching on the appli-
ance
1. Press .
a The appliance begins to cool.
a A warning signal sounds and
lights up because the freezer com-
partment is still too warm.
2. Switch off the warning tone using
.
a goes out as soon as the set
temperature has been reached.