en
28
Installation dimensions
908
1787
387
763
908
1730
629
708
515
min. 53
max. 62
Door opening angle
277
418
908
28
135°
130°
1603
763
708
629
(B)
a
b
90°
90°
135°
130°
(A) (A)
(B)
a b
600
A: unit depth
B: wall
Drawers can be pulled out
with door open to 90°.
Drawers can be taken out
with door completely opened.
650
700
50
50
53
75
418
50
50
96
A
B
Fixing the door handle
Before you use the product, please check the handles
of the appliance. If a handle is loose, you should fix it
with the hexangular screwdriver in the clockwise
direction, then it can be used normally.
Aligning the appliance
To ensure that the appliance functions correctly, it must
besetlevelwithaspiritlevel.
Ø For sufficient leveling and air circulating in the lower
rear section of the appliance, the bottom feet may
need to be adjusted.
Ø To allow the doors to selfclose, tilt back the top
backwards at about 15 mm or 0.5° by turning the
adjustable feet.
Ø Whenever you want to move the appliance,
remember to turn the feet back up, so that the
appliance can roll freely.
Ø The rollers, which are not castors, should be only
used for forward or backward movement. Moving
the refrigerator sideways may damage your floor
and the rollers.
Ø Reinstall the appliance when relocating.
0.5°
15 mm
To Next Page
Loading...
