Siemens iQ500 KD86N Series - Additional Functions; Super Cooling and Super Freezing

en Additional functions
20
Setting the freezer compartment
temperature
1. Select the freezer compartment
with .
2. Press / repeatedly until the
temperature display (freezer com-
partment) shows the required tem-
perature.
The recommended temperature in
the freezer compartment is
−18°C.
7.5 Button lock (childproof
lock)
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
Switching on the button lock
▶
Press and hold + at the
same time for threeseconds.
a lights up.
Switching off the button lock
▶
Press and hold + at the
same time for threeseconds.
a lights up.
Additional functions
8 Additional functions
Additional functions
8.1 Super cooling
With Super cooling, the refrigerator
compartment cools as cold as pos-
sible.
Switch on Super cooling before pla-
cing large quantities of food.
Note:When Super cooling is
switched on, increased noise may
occur.
Switching on Super cooling
1. Select the refrigerator compart-
ment using .
2. Press .
a lights up.
Note:After approx. 6hours, the ap-
pliance switches to normal operation.
Switching off Super cooling
1. Select the refrigerator compart-
ment using .
2. Press .
a The previously set temperature is
displayed.
8.2 Super freezing
With Super freezing, the freezer com-
partment cools as cold as possible.
Switch on Super freezing four to
sixhours before placing food weigh-
ing 2kg or more into the freezer
compartment.
In order to utilise the freezer capacity,
use Super freezing.
→"Prerequisites for freezing capa-
city", Page24
Note:When Super freezing is
switched on, increased noise may
occur.
Switching on Super freezing
1. Select the freezer compartment
with .
2. Press .
a lights up.
Note:After approx. 54hours, the ap-
pliance switches to normal operation.
Switching off Super freezing
1. Select the freezer compartment
with .
2. Press .
a The previously set temperature is
displayed.