Siemens iQ500 KD86N Series - 14.4.1.2 Fitting the shelf above the fruit and vegetable container

en Cleaning and servicing
28
3. Lift the fruit and vegetable con-
tainer covers and remove them
⁠.
→Fig.
23
4. Tilt the shelf above the fruit and ve-
getable container to the side
and remove it ⁠.
→Fig.
24
Fitting the shelf above the fruit and
vegetable container
1. Tilt the shelf above the fruit and ve-
getable container to one side to in-
sert it and then lower ⁠.
→Fig.
25
2. Move the humidity controllers to
the front.
→Fig.
26
3. Clip the fruit and vegetable con-
tainer covers in place.
→Fig.
27
Make sure that the fruit and veget-
able container covers sit in the
openings under the humidity con-
trollers.
4. Insert the storage containers and
the fruit and vegetable containers.
→Fig.
28