Siemens iQ700 BE732 1 1I Series - Basic Settings; 14.1 Overview of the basic settings; 14.2 Changing the basic settings; 14.3 Changing the time

en Basic settings
16
Basic settings
14 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
for some time even after a power cut.
Basic settings Selection
Language See selection on the ap-
pliance
Time "Time" in 24-hour format
Date "Date" in the format
DD.MM.YYYY
Display Selection
Brightness ¡ Settings 1 to 8
1
"Time", standby mode ¡ On (this setting in-
creases energy con-
sumption)
¡ displayed, for set time
1
¡ Off
"Time", display ¡ Digital + date
1
¡ Digital
¡ Analog
Adjustment ¡ Align the display hori-
zontally and vertically.
1
Factory setting (may vary according to model)
Sound Selection
Button tone ¡ On
1
¡ Off
Signal tone ¡ Very short
¡ Short duration
¡ Medium duration
1
¡ Long duration
1
Factory setting (may vary according to model)
Appliance settings Selection
Illumination ¡ On
1
¡ Off
Microwave output selec-
tion
¡ 90W
¡ 180W
¡ 360W
¡ 600W
¡ boost
1
Factory setting (may vary according to model)
Customisation Selection
Brand logo ¡ Display
1
¡ Don't display
Operation after switch-on ¡ Main menu
1
¡ Microwave
¡ Meals
¡ Grill
Elapsed cooking time ¡ Display
1
¡ Don't display
Childproof lock ¡ Available
¡ Deactivated
1
Factory setting (may vary according to model)
Factory settings Selection
Factory settings ¡ Restore
¡ Cancel
Appliance information ¡ Displaying "Appliance
information"
14.2 Changing the basic settings
Requirement:The appliance is switched on.
1.
Press "Basic settings".
2.
Press the required basic setting.
3.
Change the required settings on the display.
4.
Use to return to the overview or go back to the
main menu.
14.3 Changing the time
You can change the time in the basic settings.
Requirement:The appliance is switched on.
1.
Press "Basic settings".
2.
Press the "Time" basic setting.
a The display shows the set value. The hours flash.
3.
Use and to set the hours.
4.
Press the minutes.
5.
Use and to set the minutes.
6.
Press "Apply".
7.
Use to return to the overview or go back to the
main menu.