Siemens iQ700 SN67ZX86DM User Manual (English)

To Next Page

9001722691 (020713) SN67ZX86DM

*9001722691*

Quick reference guide Dishwasher

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip:Connect your appliance to a mobile device. You can con-

veniently change all settings using the HomeConnect app.

Install the HomeConnect app on your mo-

bile device and follow the instructions.

Scan the QR code with the HomeConnect

app.

Overview of water hardness settings

You can find an overview of the

water hardness values that can

be selected here.

A table of country-specific units

can be found in the instruction

manual.

Hardness

range

mmol/l Setting

value

Soft 0 - 1.1 0 - 8

Soft 1.2 - 1.4 9 - 10

Medium 1.5 - 1.8 11 - 12

Medium 1.9 - 2.1 13 - 15

Medium 2.2 - 2.9 16 - 20

Hard 3.0 - 3.7 21 - 26

Hard 3.8 - 5.4 27 - 38

Hard 5.5 - 8.9 39 - 62

Setting the water softening sys-

tem

Press ⁠.

To open the basic settings, press

for approx. 3seconds.

Press repeatedly until the display

shows "Water hardness".

Press or repeatedly until the

right water hardness has been set.

To save the settings, press for ap-

prox. 3seconds.

Adding special salt

To avoid damage to the appliance, only add special

salt to the dispenser for special salt just before the

programme starts.

Unscrew the lid of the dispenser for special salt

and remove.

On initial start-up: Fill the dispenser right up with

water.

Add the special salt to the

dispenser. The water in the

dispenser is displaced and

forced out. Never add de-

tergent.

Place the lid back on the dispenser and turn to

close.

Adding rinse aid

Press the catch on the lid

of the dispenser for rinse

aid and lift ⁠.

Add rinse aid up to the

max mark.

max

Close the lid of the dispenser for rinse aid.

a The lid clicks into position.

How to use your appliance

Load the tableware.

Only clean tableware that is suitable for dish-

washers. Remove large remnants of food from

the tableware. Check that the spray arms can ro-

tate freely.

Add detergent.

Switch on the appliance ⁠.

Select the programme.

Start the programme ⁠.

Remove the tableware at the end of the pro-

gramme.

To cancel the programme, press for

approx. 4seconds.

The programme is cancelled and ends after ap-

prox. 1minute.

Programmes

The programme data has been meas-

ured in the laboratory according to

European standard EN60436.

The consumption figures depend on

the programme and additional func-

tion selected.

The runtime will change if the rinse

aid system is switched off or rinse aid

needs to be added.

Programme 1) Duration [h:min]

2) Energy [kWh]

3) Water [l]

Intensive 70°

1) 2:25-2:30

2) 1.150-1.250

3) 10.6-13.5

Auto 45-65°

1) 1:40-2:40

2) 0.680-1.300

3) 7.0-15.5

Eco 50°

1) 3:55

2) 0.640

3) 10.4

Intelligent

1) 2:25 -2:30

2) 0.750 -0.800

3) 11.5 -12.0

Glass 40°

1) 1:40-1:45

2) 0.750-0.800

3) 11.1-13.7

Speed 65°

1) 1:00

2) 1.350

3) 10.2

Machine Care

1) 2:10

2) 1.400

3) 15.2

Favourite

1) 0:15-0:15

2) 0.050-0.050

3) 4.0-4.0

Adding detergent

Add the detergent to the

dry detergent dispenser.

15 ml

25 ml

50 ml

Close the lid of the deter-

gent dispenser.

a The lid clicks into position.

Need help?

Do you have a question about the Siemens iQ700 SN67ZX86DM and is the answer not in the manual?

Siemens iQ700 SN67ZX86DM Specifications

General

Capacity	14 place settings
Energy Efficiency Class	A
Noise Level	42 dB
Water Consumption per Cycle	9.5 liters
Drying System	Zeolith Drying
Control Type	Touch Control
Number of Programs	8
Child Lock	Yes
Dimensions	815 x 598 x 550 mm
Special Features	hygienePlus
Annual Water Consumption	2660 liters
Programs	Auto, Eco, Glass, Intensive, Quick
Delay Start	Yes