To Next PageTo Next Page
What to do if Siemens Iron drips water when using the shot of steam?
If your Siemens Iron is dripping water from the soleplate during the “shot of steam” function, you might be pressing the shot of steam button too frequently. Ensure you wait 5 seconds between each press. Also, the temperature may be too low; try setting it to “max”.
Why doesn't my Siemens Iron steam in horizontal position?
If your Siemens Iron isn't producing steam in a horizontal position, it might be because “Steam on demand” mode is selected. Press the steam activation trigger to generate steam, or double-click it to select “autoSteam” mode.
Why are deposits coming out of my Siemens Iron?
If you notice deposits coming out through the holes in the soleplate of your Siemens Iron, it indicates that traces of lime scale are coming out of the steam chamber. To resolve this, you should carry out a cleaning cycle.
What does it mean when the calc light flashes on my Siemens Iron?
If the automatic clean warning lamp “calc” flashes on your Siemens Iron, the “calc'n Clean” reminder has been activated. You should carry out a cleaning cycle.
Why does my Siemens Iron not produce steam horizontally?
If steam does not come out of your Siemens Iron in a horizontal position, it might be because the “Steam on demand” mode has been selected. Press the steam activation trigger to generate steam. Double click on steam activation trigger to select the “autoSteam” mode.
Why is my Siemens Iron not heating up?
If your Siemens Iron isn't heating up, it might be in stand-by mode due to the “startStop Control” function. Try gripping the handle to restart it. Alternatively, the soleplate may be heating up or cooling down to the selected temperature, which is normal; the lights will stop flashing once the temperature is reached.
How to prevent clothes from sticking to my Siemens Iron?
If your clothes are sticking to the Siemens Iron, the soleplate temperature may be too high. Select a lower temperature and wait for the iron to cool down.
Why does my Siemens Iron smoke when first used?
If smoke comes out when connecting your Siemens Iron for the first time, this is normal and caused by the lubrication of some internal parts. It will stop after a few minutes.
Why is the motor in my Siemens Iron not working?
If the motor in your Siemens Iron isn't working, ensure the iron is in a horizontal position. Also, if the soleplate is heating up, wait until the selected temperature is reached.
Why does my Siemens Iron make a pumping sound?
This pumping sound from your Siemens Iron is normal. It indicates that water is being pumped into the steam chamber.
General| Current | 10 A |
|---|---|
| Connected load | 2300 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Water consumption per cycle | - L |
| Energy consumption washing per cycle | 1.03 kWh |
| Washing class | A |
| Annual water consumption washing | 10500 L |
| Annual energy consumption washing | 189 kWh |
| Door color | Gray |
| Door hinge | - |
| Cord length | 1.75 m |
| Drum volume | 65 L |
| Control type | Rotary |
| Display type | LCD |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Door opening angle | 165 ° |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Residual moisture | 52 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 71 dB |
| Noise level (wash) | 49 dB |
| Package depth | 690 mm |
| Package width | 660 mm |
| Package height | 875 mm |
| Package weight | 79000 g |
Weight and Dimensions| Depth | 590 mm |
|---|---|
| Width | 600 mm |
| Height | 842 mm |
| Weight | 78000 g |
| Depth with door open | 1058 mm |
