EasyManua.ls Logo

Siemens KG36NHI32 - Equipment Cleaning, Odors, Lighting, and Noises; Cleaning Parts, Odor Control, Lighting, and Noise Management

Siemens KG36NHI32
138 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Odours en
49
Cleaning the equipment
To clean, take the variable parts out of
the appliance.
~ "Interior fittings" on page 36
Camera
The change in temperature and
humidity can cause the camera lenses
to steam up.
To prevent this: treat the camera lenses
with a commercially available rain
deflector.
Use a micro-fibre cloth for this
treatment, and for cleaning as well.
l Odours
Odours
If you experience unpleasant odours:
1. Switch off the appliance with
the On/Off button )".
2. Take all food out of the appliance.
3. Clean the inside.~ "Cleaning"
on page 48
4. Clean all packages.
5. Seal strong smelling food in order
to avoid odours from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of
odours is still occurring after
24 hours.
9 Lighting
Lighting
Your appliance features a
maintenance-free LED light.
Only customer service or authorised
technicians may repair the light.
If the appliance is open for longer than
10 minutes, the lighting is automatically
switched off.
> Noises
Noise
Normal noises
Droning: A motor is running, e.g.
refrigerating unit, fan.
Bubbling, buzzing or gurgling:
Refrigerant is flowing through the tubes.
Clicking: Motor, switches or solenoid
valves are switching on and off.
Clicking on cameras: End standby
modus and calibrate cameras. No data
transfer takes place.
Cracking: Automatic thawing
successful.
Preventing noises
Appliance is not level: Align appliance
using a spirit level. If required, place a
little packing underneath.
The appliance is not "free-standing":
please move the appliance away from
adjacent furniture or appliances.
Containers, shelves or storage
compartments wobble or stick: Check
the removable fittings and re-insert if
required.
Bottles or receptacles are touching
each other: Move bottles or receptacles
away from each other.

Table of Contents

Related product manuals