en Additional functions
16
Operating tips
¡ Once you have switched on the
appliance, the set temperature is
only reached after several hours.
Do not put any food in the appli-
ance until the temperature has
been reached.
¡ The housing around the freezer
compartment is temporarily heated
slightly. This prevents condensa-
tion in the area of the door seal.
¡ When you close the door, a va-
cuum may be created. The door is
then difficult to open again. Wait a
moment until the vacuum is offset.
Switching off the appliance
▶
Press .
a The appliance stops cooling.
Setting the temperature
After you have switched on the appli-
ance, you can set the temperature.
Setting the refrigerator
compartment temperature
▶
Press repeatedly until the tem-
perature display shows the re-
quired temperature.
The recommended temperature in
the refrigerator compartment is
4°C.
→""OK" sticker", Page17
Setting the freezer compartment
temperature
▶
In order to set the freezer compart-
ment temperature, "change the re-
frigerator compartment temperat-
ure" →Page16.
The refrigerator compartment tem-
perature influences freezer com-
partment temperature. Refrigerator
compartment temperatures that
are set to warm generate warmer
freezer compartment temperatures.
Additional functions
Additional functions
Additional functions
Find out which additional functions
can be used for your appliance.
Super function
With the Super function, the refriger-
ator compartment and the freezer
compartment cool more intensively.
This refrigerates or freezes food
quickly right through to the centre.
Switch on the Super function 4 to
6hours before placing food weighing
2kg or more.
In order to utilise the freezer capacity,
use the Super function.
→"Freezing capacity", Page18
Note:When the Super function is
switched on, increased noise may
occur.
Switching on Super function
▶
Press repeatedly until lights
up.
Note:After approx. 48hours, the ap-
pliance switches to normal operation.
Switching off Super function
▶
Press .
To Next Page
Loading...
