Siemens LC81KAN60 - 5 Familiarising yourself with your appliance; 5.1 Overall view; 5.2 Control panel; 6 Before using for the first time

en Familiarising yourself with your appliance
6
Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Overall view
You can find an overview of the parts of your appliance
here.
3
1
2
4
5
1
Glass plate
2
Control panel
3
Appliance
4
Front grease filter
5
Lower grease filter
5.2 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching on fan setting1
Switching on fan setting2
Switching on fan setting3
Switching on intensive mode
Switching the lighting on or off
Setting the brightness
HomeConnect
Before using for the first time
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note:When using it in circulating-air mode, you require
additional accessories.
▶
When using it in circulating-air mode, set the operat-
ing mode.
→"Filter saturation", Page7