EasyManuals Logo

Siemens LC8A950 User Manual

Siemens LC8A950
Go to English
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
Keep pressing the + button until a
ç
appears in the display.
If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step } after 10 minutes.
Fan follow-on:
Press the
! button or push in the filter
drawer.
The fan runs for 10 minutes at setting 1.
At the same time the
! display comes
on.
Then the fan switches off automatically.
Lighting:
Briefly press the
a button to switch the
light on and off.
The light can be switched on at any
time, even though the fan is switched off.
Adjusting the brightness:
Hold down the
a button until the
desired brightness is obtained.
Switching on the light automatically, e.g.
via a timer:
Fan and light must be switched off.
Switching on:
Simultaneously press the and
!
buttons.
After approx. 3 seconds the light
switches on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
After approx. 3 seconds the light
switches off to acknowledge the setting.
Operating procedure
Acoustic signal:
When a button is pressed, this is verified
by an acoustic signal.
Switching off the acoustic signal:
Simultaneously press buttons 0 and +
until a signal is emitted after approx. 3
seconds.
Switching on the acoustic signal:
Repeat the process.
Switching the fan ON
Press the + button or pull out the filter
drawer.
Setting the required fan speed:
Press the + button.
The fan speed is increased by one step.
Press the – button.
The fan speed is reduced by one step.
Switching the fan OFF:
Press the 0 button.
The displayed
{ goes out shortly
afterwards.
Or:
Keep pressing the button until the fan
switches off.
The displayed
{ goes out shortly
afterwards.
The most effective method of removing
vapours produced during cooking is to:
Switch the ventilator ON
as soon as you begin cooking.
Switch the ventilator OFF
a few minutes after you have finished
cooking.
20
Light
Reduce fan
speed
Fan ON and
increase speed
Display for fan setting Fan follow-on
Fan OFF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens LC8A950 and is the answer not in the manual?

Siemens LC8A950 Specifications

General IconGeneral
BrandSiemens
ModelLC8A950
CategoryVentilation Hood
LanguageEnglish

Related product manuals