ImportAppliances.com
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en Home Connect
12
1. Press and hold the & symbol until the D and Ù
indicators start flashing.
2. Tap the + symbol to start automatic login to your
home network. D and ‚ will flash.
3. Press the WPS button on the router within the next
2 minutes.
If the extractor hood has successfully connected, it
will automatically connect to the Home Connect app.
D and „ will flash.
Note: If the extractor hood has been unable to
connect, it will automatically allow you to manually
connect to your home network. D and ƒ will flash.
Log the appliance into your home network manually
or press - to try logging in automatically again.
4. On your mobile device, follow the instructions for
automatic network login.
The login process is complete when the D indicator
stops flashing on the control panel and remains
continuously lit.
Manual registration in the home network
Notes
■ The extractor hood cannot be switched on during the
connection process. You can cancel the process at
any time by pressing the # symbol.
■ To connect the extractor hood to your home
network, the hood and the light must be switched off.
1. Press and hold the & symbol until the D and Ù
indicators start flashing.
2. Tap the + symbol twice to manually log into your
home network. D and ƒ will flash.
3. Use the "Home Connect" SSID and the "Home
Connect" key to log the mobile device into the
extractor hood network.
If the extractor hood has successfully connected, it
will automatically connect to the Home Connect app.
D and „ will flash.
4. On your mobile device, follow the instructions for
manually logging into your network.
The login process is complete when the D indicator
stops flashing on the control panel and remains
continuously lit.
Connecting to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your extractor hood.
Notes
■ The appliance must be connected to the network.
■ The app must be open.
1. Press and hold the & symbol until the D and „
indicators start flashing.
2. On your mobile device, follow the instructions in the
Home Connect app.
The connection process is complete when the D
indicator stops flashing on the control panel and
remains continuously lit.
Software update
Using the software update function, your extractor
hood's software can be updated (e.g. for the purpose of
optimisation, troubleshooting or security updates). To
do this, you need to be a registered Home Connect
user, have installed the app on your mobile device and
be connected to the Home Connect server.
As soon as a software update is available, you will be
informed through the Home Connect app and will be
able to start the software update via the app.
Once the update has been successfully downloaded,
you can start installing it via the Home Connect app if
you are on your local area network.
The Home Connect app will inform you once installation
is complete.
Notes
■ You can continue to use your extractor hood as
normal while updates are downloading.
■ Depending on your personal settings in the app,
software updates can also be set to download
automatically.
■ We recommend that you install security updates as
soon as possible.
Remote diagnostics
If a fault occurs, the after-sales service can use remote
diagnostics to access your appliance.
Contact the after-sales service, making sure that your
appliance is connected to the Home Connect server
and checking that the remote diagnostics service is
available in your country.
Note: For more information and to check whether the
remote diagnostics service is available in your country,
please visit the Help & Support area of the Home
Connect website for your country: www.home-
connect.com
To Next Page
Loading...
Need help?
General
