What to do if my Siemens Hearing Aid does not work?
If your Siemens Hearing Aid isn't working, first ensure it's turned on. Then, gently close the battery compartment completely and verify the battery is correctly inserted. Replace the battery if it's empty. Also, be aware that the power-on delay may be active; wait 18 seconds and check again.
How to fix weak sound in Siemens Life Hearing Aid?
If the sound from your Siemens Hearing Aid is weak, try these steps: replace the empty battery, clean or exchange the LifeTip or LifeTube, and clean or exchange the microphone cover. If you have a remote control, increase the volume.
Why is the sound distorted on my Siemens Life?
Distorted sound on your Siemens Hearing Aid can often be resolved by lowering the volume using the remote control. Also, try replacing the battery or cleaning/exchanging the microphone cover.
How to stop whistling sound from Siemens Life?
To stop a whistling sound from your Siemens Hearing Aid, try reinserting the LifeTip until it fits securely. You can also lower the volume using the remote control. Additionally, cleaning the LifeTip may resolve the issue; if not, consider contacting your Hearing Care Professional.
What to do if Siemens Life Hearing Aid emits signal tones?
If your Siemens Hearing Aid is emitting signal tones, gently close the battery compartment completely. If the issue persists, replace the battery.
General| Category | Hearing Aid |
|---|---|
| Manufacturer | Siemens |
| Microphone Type | Directional |
| Noise Reduction | Yes |
| Feedback Cancellation | Yes |
| Battery Size | Size 13 |
| Type | Behind-the-ear (BTE) |
Acoustic signal indicates when the battery is nearly empty.
Step-by-step guide on how to properly insert the hearing instrument into the ear.
Instructions for safely taking the hearing instrument out of the ear.
How to turn the hearing instrument on/off using the battery compartment.
Method for turning the hearing instrument on/off using the device's push button.
Instructions for operating via a separate remote control.
How to change hearing programs using the device's push button.
Instructions for changing programs using the remote control.
Describes automatic volume adjustment functionality.
How to adjust volume using the remote control.
Enables accessories and synchronized operation of both hearing instruments.
Information about using the remote control with the hearing instrument.
To Next Page
