EasyManua.ls Logo

Siemens M35 Series - Level 2.5 Repair Procedures; Product Identification and ESD Precautions

Siemens M35 Series
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Level 2.5 Repair Document
Introduction
The C/M/S35 product family consists of 5 different dualband handsets (GSM-900 and
GSM-1800), which can easily be distinguished from the second block of the part number printed
on the IMEI label. There also exist Asian variants of C/M/S35 named 3508 / 3518 / 3568
respectively. All information below also applies to the Asian variants unless otherwise noted.
Partnumber on IMEI label:
1) C35 / 3508: S30880-S4000-Xxxx
2) C35i / 3508i: S30880-S4050-Xxxx
Same as C35 / 3508 but with additional WAP and fax/data capabilities
3) M35 / 3518: S30880-S4200-Xxxx
4) M35i / 3518i: S30880-S4250-Xxxx
Same as M35 / 3518 but with additional WAP and fax/data capabilities
5) S35i / 3568i: S30880-S4100-Xxxx
This manual is intended to help you carry out repairs on level 2.5, meaning limited component
repairs. Failure highlights are documented and should be repaired in the local workshops.
It must be noted that all repairs have to be carried out in an environment set up according to the
ESD (Electrostatic Discharge Sensitive Devices) regulations defined in international standards.
All repairs have to be carried out in an environment set up
according to ESD regulations defined in international standards.
ESD procedure is available from your Service Manager. Ask for
ASC/T001/98
Fault code listed must be used for LSO reporting purpose.
Fault Description Fault Code Part Number
Chapter
4

Related product manuals