Priority:
........ Mandatory
........ Repair
........ Optional
........ Not Yet Defined
Repair Documentation
Description of procedure:
D I A G N O S I S
Check the output power of the handset with the LSO testprogram.
Especially watch the external antenna power!
R E P A I R B Y C O M P O N E N T C H A N G E
Use hot air blower to remove defective connector
Avoid excessive heat!
Watch surrounding components!
Resolder new connector afterwards.
R E P A I R B Y S W - B O O T I N G
Not possible!
T E S T
Retest handset after repair as described above.
List of needed material
C O M P O N E N T S
X35 antenna connector
Attention: This is not the same connector as C25/S25 !!!
Part-Number: L36334-Z93-C272
J I G S A N D T O O L S
Hot Air Blower
Soldering Iron
To Next Page
Loading...
