Siemens M65 - Page 16

SIEMENS PTE LTD
M65 Level 2 Service Manual
Copyright © Siemens Pte Ltd. Siemens Technical Support Centre
All Rights Reserved May 2004
ICM MP CCQ SLI RHQ Page 16 of 37 Company Confidential
Step 11
Separate the Case Gasket from the PCB and Upper
Case.
Step 12
Separate the PCB from the Upper Case. Place the PCB
on ESD safe foam.
Step 13
Remove the Keypad + Joystick Cap, SAR Frame and
MMI from the PCB.
Step 14
Remove the Display Module, as shown, from the PCB.
Place the Display Module and PCB on ESD safe foam.
Step 15
Remove the Shielding Cover for Camera Module Frame from the PCB as shown. Place the PCB on ESD safe foam.