SIEMENS PTE LTD
MC 60 Level 2 Service Manual
Copyright © Siemens Pte Ltd. Siemens Technical Support Centre
All Rights Reserved
ICM MP CCQ ASP/ASC Page 17 of 37 Internal Use Only
Step 11
To detach the camera module with a pair of tweezers to
disconnect the flex cable from the connector. Then,
gently push the camera outwards as shown by the
arrow.
Step 12
Remove the Vibrator motor and MIC from the Lower
Mounting Frame.
Step 13
Fully disassembled MC 60
To Next Page
Loading...
