08/2005 Preface
v
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Diagnostics Guide (DA), 08/2005 Edition
Structure of alarm description
Each alarm consists of an alarm number and alarm text. There are four descrip-
tion categories:
• Explanation
• Reaction
• Remedy
• Program continuation
For a more detailed explanation of the "Reaction" category, please refer to
section: "System reactions on alarms"
For a more detailed explanation of the "Program continuation" category, please
refer to the section: "Clear criteria for alarms"
Structure of the alarms for the number range 200 000 - 299 999
Each alarm (fault or warning), consisting of a number, location (optional) and
alarm text, is indicated with further information for the following categories:
• Reaction
• Acknowledgment
• Cause
• Remedy
Note
Instead of <location>, the following is indicated in the alarm display:
• Axis name and drive number or
• Bus and slave number of the PROFIBUS DP component affected
For a more detailed explanation of the "Reaction" / "Acknowledgement" category,
please refer to section: "System reactions on SINAMICS alarms".
"Cause":
For the cause of the alarm/warning, the fault / warning value is prepared as far as
possible in text form.
To Next Page
Loading...
Need help?
General
