Siemens miniTek Owner's Manual

Using a loop system
28
Your miniTek is equipped with a telecoil. This is intended
for using induction loops, e. g. in churches, theaters or in
a lecture room.
 Press for about 3 seconds to turn the miniTek
on.
 Press to change to the loop receiver
(refer to table "Changing the audio source" in chapter
"Basic functions").
You can now hear the sound from the loop system
through your hearing instruments.
Using a loop system

Siemens miniTek Specifications

General

Brand	Siemens
Model	miniTek
Category	Remote Control
Language	English