Siemens mobile phone - Speed Dialing Keys

69
12.2.02 06-S46 Body.fm i 37 Am Engl, A31008 -H5450-A5-1-4A19
Fast Access Keys
Speed dialing keys
Digit keys 2 through 8 may be set to
speed dial important or frequently
called numbers. For available key
assignment see page 68.
Set-up/Change
In standby mode:
J
Press and hold digit key
(2-8).
If the key is not already assigned,
the
Hotkey menu will appear.
…
Scroll to select a function
or
Phone number
.
Select
Select soft key to assign
Hotkey action.
(If you select
Phone
number
, you will be taken
to the address book to
select a number.)
To change the action for an already
assigned Hotkey.
J
Press number.
§[action]§
Select soft key to select
assigned function.
§Change
Select soft key to
reassign Hotkey.
The following keys are reserved:
1
= Voice mailbox (p. 41).
:
= Emergency calls (p. 4).
Clear speed dialing key
To clear a speed dialing key, press
the key, then select the feature that
is currently programmed (shown on
the right soft key).
§Change§
Select soft key.
…
Scroll to the “Empty”
selection.
§Select§
Select soft key.
Apply
To select a stored phone number or
start a stored application:
In standby mode:
J
Press digit key.
The assignment of digit key is
displayed instead of the standard
right soft key. Select and hold soft
key to launch function or place
phone call.
Shortcut:
J
Press and hold desired
digit key to begin action.