Siemens MT50 - Setup; Device Settings; Key Functions; Auto Key Lock

Audio
59
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 11:00)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Audio.fm
Audio You can set the tones that sound in
specific situations to suit your partic-
ular tastes.
§Menu§
¢
Audio
¢
Select a function:
Ringer setting
Activate/deactivate the ringer or re-
duce it to a short beep.
*
Hold down in standby
mode (p. 78).
Volume
You can set the volume for each area.
MN
Select the type:
All calls
d Calls
Group calls
Appointments
Messages
Cell broadcast services
MN
Set volume.
§OK§ Confirm.
Call screening
Only calls from numbers that are in
the Phonebook or in a predefined
group are signalled audibly or by
silent alert. Other calls are merely
displayed.
If you do not accept these calls, they
are diverted to your mailbox (if set,
p. 41).
Silent alert
To avoid being disturbed by the ring-
er, you can activate the silent alert of
the phone instead. The silent alert
can also be activated in addition to
the ringer (e.g. in noisy environ-
ments). This function is deactivated
when the battery is being charged.
Key tones
You can set the acoustic key tone:
Click or Tone or Silent
Note
)
Display: Beep.
&
Display: Ringer off.
Note
Displays rising volume.
If two independent phone numbers are
registered for your phone you can set
different volumes for them (p. 64).
Note
(
Displayed
when filter is activated.
~