Siemens MTP1500 Unified Comfort

1.1
Wichtige Hinweise – Important information – 重要信息
Allgemeine Sicherheitshinweise – General safety instructions – 一般安全提示
Betriebsanleitung – Operating Instructions – 操作说明
1.2
Zulässige Einbaulagen – Valid Mounting positions – 有效的安装位置
1.3
Bediengerät einsetzen – Installing the HMI device – 安装 HMI 设备
Bediengerät einbauen
Mounting the HMI device
安装 HMI 设备
1
mm
Dieses Dokument ist lediglich eine Montageanleitung. Sicherheitshinweise, sowie die vollständige
Montage und Inbetriebnahme sind in der Betriebsanleitung beschrieben.
This document provides simple installation instructions. Complete installation, commisioning
and safety instructions are described in the operating instructions.
本文档仅仅是安装说明。 完整的安装、调试以及安全指南，可参
考操作指南手册。
https://support.industry.siemens.com/cs/ww/de/ps/26033/man
0°-
35°
0°-
35°
40 °C
0 °C
40 °C
0 °C
50 °C (7-15“ devices)
45 °C (19“-22“ devices)
0 °C
1.4
Bediengerät befestigen – Mounting the HMI device– 安装 HMI 设备
Torque = 0.5 Nm
CAUTION
!
Drehmoment = 0,5 Nm
VORSICHT
!
力矩 = 0.5 Nm
!
小
心
0°-35°
0°-35°
35 °C
0 °C
35 °C
0 °C
40 °C
0 °C
w
h
2-6
0.5
Enclosure
Type 4X/12
Unified
Comfort Panel
1
d
2
+1
0
+1
0
MTP700
w
197 x
x
x
x
x
x
h
141
MTP1000 264 189
MTP1200 310 221
MTP1500 382 241
MTP1900 448 278
MTP2200 513 315
d
64
64
64
73
73
73
SIMATIC HMI
Quick Install Guide
MTP700 Unified Comfort
MTP1000 Unified Comfort
MTP1200 Unified Comfort
MTP1500 Unified Comfort
MTP1900 Unified Comfort
MTP2200 Unified Comfort
Bediengerät einbauen
Mounting the HMI device
安装 HMI 设备
Bediengerät anschließen
Connecting the HMI device
连接 HMI 设备
Projekt transferieren
Transferring a project
传送项目
Reparatur und Ersatzteile Service and spare parts 维修和备件
https://support.industry.siemens.com/sc/de/en/sc
Technische Support-Zentrale – Central Technical Support – 技术支持中心
https://support.industry.siemens.com
Click!
1
2
y
x
x
y
z
y
z
x
x
y
Montageclip-Positionen – Mounting clip positions – 装配夹的位置
MTP700 Unified Comfort
MTP1500 Unified Comfort
MTP1000 Unified Comfort
MTP1200 Unified Comfort
MTP1900 Unified Comfort
MTP2200 Unified Comfort
xyz
15 50 10
Minimaler Belüftungsfreiraum
Minimum ventilation clearance
用于通风的最小空隙
Click!
4 x
3
03/2020
A5E46641375-AD

Siemens MTP1500 Unified Comfort Specifications

General

Display Size	15.6 inches
Resolution	1366 x 768 pixels
Contrast Ratio	800:1
Operating Temperature	0 °C to 50 °C
Operating System	Windows 10 IoT Enterprise
Power Supply	24 V DC
Enclosure	Aluminum
Storage Temperature	-20 °C to 60 °C
Dimensions (W x H x D)	400 x 300 x 60 mm
Weight	Approx. 5.5 kg
Mounting	Panel Mount
Display Type	TFT
Touch Technology	Projected Capacitive
IP Rating	IP65
Interfaces	2x Ethernet
Viewing Angle	160° horizontal, 160° vertical
Humidity	10% to 90% (non-condensing)
Shock Resistance	15 g
Vibration Resistance	5 Hz to 9 Hz: 3.5 mm constant amplitude, 9 Hz to 150 Hz: 1 g constant acceleration

Summary

Mounting the HMI Device

Important Information and Safety Instructions

General safety instructions and important information for HMI device operation.

Valid Mounting Positions

Specifies the allowed mounting positions for the HMI device.

Installing the HMI Device

Detailed steps for installing the HMI device into an enclosure.

Securing the HMI Device

Instructions on how to secure the HMI device using mounting clips.

Connecting the HMI Device

Important Connection Information

Critical information for connecting the HMI device, including strain relief.

Equipotential Bonding

Guidelines for routing equipotential bonding conductors and data cables.

Connecting the Power Supply

Instructions for connecting the DC 24V power supply to the HMI device.

Connecting the Configuring PC

Steps to connect the HMI device to a PC for configuration and data transfer.

Transferring a Project

Data Transmission Options

Overview of methods for transferring projects to the HMI device.