What to do if Siemens Pure SE Hearing Aid does not work?
If your Siemens Hearing Aid isn't working, here are a few things to try: * Ensure the hearing instrument is turned on. * Check that the battery compartment is gently but completely closed. * Replace the battery, making sure it's inserted correctly. * Also, be aware that the power-on delay might be active; wait 18 seconds and check again.
How to fix weak sound in Siemens Hearing Aid?
If the sound from your Siemens Hearing Aid is weak, you can try the following: * Replace the battery. * Clean the dome, receiver mold or custom shell. * Exchange the microphone cover. * Increase the volume.
What to do if Siemens Hearing Aid sound is distorted?
If the sound from your Siemens Hearing Aid is distorted, try these steps: * Decrease the volume. * Replace the battery. * Clean the dome, receiver mold or custom shell.
Why does my Siemens Hearing Aid emit whistling sounds?
If your Siemens Hearing Aid is whistling, try these solutions: * Reinsert the dome, receiver mold, or custom shell until it fits securely. * Decrease the volume. * Clean the dome, receiver mold, or custom shell.
Why is my Siemens Pure SE emitting signal tones?
If your Siemens Hearing Aid is emitting signal tones, try these solutions: Gently close the battery compartment completely or replace the battery.
General| Battery Type | Zinc-Air |
|---|---|
| Battery Size | 312 |
| Feedback Cancellation | Yes |
| Channels | 16 |
| Wireless Connectivity | Yes |
To Next Page
