Siemens QMX2.P43 - User Manual

A6V10733768_en--_a Building Technologies
2017
-
0
7
-
28
Wall-mounted sensors and room operator units for KNX PL-Link
QMX2.P33 / QMX2.P43
Communicative sensors and room operator units with KNX PL
-
Link (for Desigo™ T
o-
tal Room Automation).
● Room temperature and humidity measurement (depending on types)
● LCD display of room temperature, operating modes, etc.
● Operation with 8 push buttons
● Interface KNX PL-Link (for TRA, with plug and play functionality)
● Powered over KNX PL-Link

Summary

Wall-mounted sensors and room operator units for KNX PL-Link

Functions

Mechanical design

Security

Engineering

Mounting

Installation

Commissioning

Prerequisites

Conditions before device commissioning.

Automatic commissioning

Device communication with controller for automatic setup.

Manual commissioning

Addressing

Steps to identify and assign the device address.

Connection test

Procedure to test the KNX PL-Link connection.

Reset to factory settings

Reset to factory setting

Operation

Technical Data

Sensor Data

Tool plug

Service tool

Dimensions

Siemens QMX2.P43 Specifications