Siemens RDF302 - Communication Objects

41 / 62
Siemens RDF302 Basic documentation CE1P3079en
Smart Infrastructure 2022-06-17
3.12 Communication objects
3.12.1 Overview
Output communication object
Input & output communication object
Configuration & commissioning communication object
1)
P01 must be set to 3, the manual heating/cooling changeover
Either using local input, X1/X2 input, or Modbus command
2)
Dip switch position 1 to 3 must be set to OFF-OFF-OFF
3)
Not applicable to RDF302.B