Siemens RUGGEDCOM RX1510 - Installing;Removing Power Modules

Modules
4.3Installing/Removing Power Modules
3. Insert the new module into the slot.
1
2
3
1
Module
2
Chassis
3
Screw
Figure4.3 Installing a Module
4. Tighten the screws to secure the module.
5. [Optional] If necessary, install the device in the rack.
4.3 Installing/Removing Power Modules
The RUGGEDCOM RX1510 supports dual redundant power supply modules.
1
2
1
Slot PS1
2
Slot PS2
RUGGEDCOM RX1510
Installation Manual, 12/2019, C79000-G8976-1055-16
39