Troubleshooting en
45
Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting Customer Service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.
Appliance safety
Fault Cause Troubleshooting
Appliance door will not open
or cannot be opened easily.
Childproof lock is activated.
Appliance door does not
open at the end of the Eco
50° programme.
Eco drying is deactivated.
▶
Activate Eco drying.
Childproof lock is activated.
▶
Deactivate the childproof lock.
Eco 50° programme not se-
lected.
▶
Select the Eco 50° programme.
Additional function selected.
▶
Deselect the additional function.
Extra Dry/Intensive drying is
activated.
▶
Deactivate Extra Dry/Intensive dry-
ing.
→"Overview of basic settings",
Page39
Door is not correctly adjus-
ted.
▶
Adjust the appliance door as de-
scribed in the installation instruc-
tions.
The door gap must be at least
70mm - 100mm.
Appliance door and door
seal are soiled.
▶
Clean the appliance door and door
seal with a damp cloth and a little
washing-up liquid.
Wrong screws used to ad-
just the door gap.
▶
Use size 4X30 screws to adjust the
door gap.
The screws are included in the
scope of supply.
To Next Page
Loading...
Need help?
General
