Siemens SCALANCE M800 - RCM (C-Tick) Declaration of Conformity for Australia;New Zealand

Approvals
A.3 General approvals
SCALANCE M874, M876
Operating Instructions, 08/2018, C79000-G8976-C331-08
97
A.3.3
RCM (C-Tick) Declaration of conformity for Australia/New Zealand
Australian Communications and Media Authority, for compliance levels 1, 2 and 3 in
Australia and levels of conformity 1, 2 and 3 in New Zealand. As required by notices under:
● Section 182 of the Australian Radiocommunications Act 1992;
● Section 407 of the Australian Telecommunications Act 1997; and
● Section 134 of the New Zealand Radiocommunications Act 1989
● Radiocommunications (Compliance Labelling - Devices) Notice 2014 made under section
182 of the Radiocommunications Act 1992
● Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under
section 182 of the Radiocommunications Act 1992
● Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2014
made under section 182 of the Radiocommunications Act 1992 and
● Telecommunications (Labelling Notice for Customer Equipment and Customer
Cabling)Instrument 2015 made under section 407 of the Telecommunications Act 1997
You can find the current declaration of conformity for these products on the Internet pages
under Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/15914/cert)
The products described in this document meet the requirements of the standards designated
under Product:
1
EN 60950-1
2
ETSI EN 301 489-1
3
ETSI EN 301 489-7
4
ETSI EN 301 489-24
5
ETSI EN 301 489-52
6
ETSI EN 301 511
7 ETSI EN 301 908-1
8
ETSI EN 301 908-13
9
1999/519/EC
10
EN 62311
11
FCC part 22
12
FCC part 24
13
FCC part 27
14
AS/CA S042.1
15
AS/ACIF S042.3
16
AS/CA S042.4
17
AS/NZS 60950.1 + Amdt