Approvals
SCALANCE M874, M876
64 Operating Instructions, 06/2015, C79000-G8976-C331-05
●
To protect the device from electrostatic discharge, personnel must first discharge any
electrostatic charge from their body before touching the device.
Note
The test was performed with a device and a connected communications partner that also
meets the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with
these standards, adherence to the
corresponding values cannot be guaranteed.
Current approvals on the Internet
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
You will also find the current approvals for the product on the Internet pages of Siemens
Automation Customer Support under the following entry ID:
80046561 (http://support.automation.siemens.com/WW/view/en/80046561/134200)
→ "Entry list" tab, entry type "Certificates"
You will find an overview of the country-specific wireless approvals of SIMATIC NET devices
with GSM or UMTS services on the Internet pages of Siemens Automation Customer
Support. You will find the link to the document on the following page:
ik-Info (www.siemens.com/simatic-net/ik-info)
To Next Page
Loading...
