Description
3.3 Reset button
SCALANCE W788-xPRO/RR / W74x-1PRO/RR
Operating Instructions, 07/2014, A5E02280448-08
15
Reset button
Functions of the reset button
The reset button is on the rear of the device below the sealing screw directly beside the C-
PLUG and has several functions:
● Restart of the device
To restart the device, press the Reset button.
● Loading new firmware
If the normal procedure with the Load & Save menu of Web Based Management does not
work, the reset button can be used to load new firmware. This situation can occur if there
was a power outage during the normal firmware update.
● Restoring the default parameters (factory defaults)
● Adopting the configuration data from the PRESET PLUG.
To Next Page
Loading...
