Connecting up
5.3 Assembling an IE hybrid cable 2 x 2 + 4 x 0.34 with an IE IP 67 hybrid connector
SCALANCE W788-xPRO/RR / W74x-1PRO/RR
Operating Instructions, 07/2014, A5E02280448-08
29
Screw the sealing sleeve to the housing. Use an open
key with a size of 24 mm. The required tightening
torque is 4.5 Nm.
Screw the hexagonal nut and sealing sleeve together.
Once again the required torque is 4.5 Nm.
To Next Page
Loading...
