Siemens SCALANCE W746-1PRO - Page 32

Connecting up
5.4 Fitting the IE FC TP standard cable 4 x 2 GP to an IE IP 67 hybrid connector
SCALANCE W788-xPRO/RR / W74x-1PRO/RR
32 Operating Instructions, 07/2014, A5E02280448-08
Remove the assembled data module from the IDC
assembly tool.
Position the top shield plate and press it over the cable
shield.
Positio
n the lower shield plate and press it and the upper
shield plate together until they lock together with an
audible "click".
Arrange the power leads and insert them as far as they
will go into the hinge elements of the isolation body.
The following table shows the assignment of the power
leads.
Wire color code (standard)
White /
blue *
Blue
White /
brown *
Brown
Function 24 V 48 V PoE Ground Chassis
PoE
Power supply insert module
1
2
3
4