EasyManua.ls Logo

Siemens SCALANCE W746-1PRO - Page 60

Siemens SCALANCE W746-1PRO
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Certification
7.1 Approvals for the SCALANCE W788-xPRO/RR and 74x-1PRO/RR
SCALANCE W788-xPRO/RR / W74x-1PRO/RR
60 Operating Instructions, 07/2014, A5E02280448-08
NCC Warning Statement (Taiwan)
Article 12
Without permission, any company, firm or user shall not alter the frequency,
increase the power, or change the characteristics and functions of the original
design of the certified lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the
navigation safety nor interfere a legal communication, if an interference is
found, the service will be suspended until improvement is made and the
interference no longer exists.
Note
The "ANT79
3-8DN" antenna is not approved in Taiwan!
Note
The specified approvals apply only when the corresponding mark is printed on the product.
KCC Statement (Republic of Korea)
사용자안내문(제5조제1항제1호관련)
기 종 별
사 용 자 안 내 문
A 급 기기
(업무용 방송통신기기)
이 기기는 업무용(A 급)으로 전자파적합등록을 한
기기이오니 판매자 또는 사용자는 이 점을
주의하시기 바라며, 가정외의 지역에서 사용하는
것을 목적으로 합니다.
"당해 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음"
Note
The specified approvals apply only when the corresponding mark is printed on the product.
Notes on approval in Mexico
Certification ID
Certification number
RAP-W1-RJ-E1
RCPSIRA08-0712
RAP-W2-RJ-E2
RCPSIRA08-0712-A1

Other manuals for Siemens SCALANCE W746-1PRO

Related product manuals